Become a Maker at the Libraries

Makerspace being used by students.

Fall workshops are underway at the NCSU Libraries Makerspace in D. H. Hill Jr.! Register now through our workshops page. We’re teaching everything from “Getting Started with 3D Design” to “Building and Controlling Beginner Projects with Raspberry Pi.” And our new 3D Scanning Studio makes its debut this semester too!

Our fall workshops:

Getting Started with the Internet of Things
Friday, Sept. 7, 10:00 a.m.-11:30 a.m., D. H. Hill Jr. Makerspace

3D Scanning Studio Orientation
Friday, Sept. 7, 4:00 p.m.-5:00 p.m., D. H. Hill Jr. 3D Scanning Studio

D. H. Hill Jr. Makerspace Orientation
Monday, Sept. 10, 11:00 a.m.-11:45 a.m., D. H. Hill Jr. Makerspace

3D Scanning Studio Orientation
Monday, Sept. 10, 1:00 p.m.-2:00 p.m., D. H. Hill Jr. 3D Scanning Studio

Getting Started with 3D Printing
Monday, Sept. 10, 3:00 p.m.-4:00 p.m., D. H. Hill Jr. Makerspace

NCSU's Virtual Computer Lab (VCL)
Tuesday, Sept. 11, 10:00 a.m.-11:30 a.m., D. H. Hill Jr. Multimedia Seminar Center

D. H. Hill Jr. Makerspace Orientation
Tuesday, Sept. 11, 8:00 p.m.-8:45 p.m., D. H. Hill Jr. Makerspace

3D Scanning Studio Orientation
Wednesday, Sept. 12, 12:00 p.m.-1:00 p.m., D. H. Hill Jr. 3D Scanning Studio

Getting Started with 3D Design
Monday, Sept. 17, 11:00 a.m.-12:00 p.m., D H. Hill Makerspace

Getting Started with eTextiles
Wednesday, Sept. 19, 1:30 p.m.-3:30 p.m., D. H. Hill Jr. Makerspace

Getting Started with Digital Embroidery
Monday, Sept. 24, 1:30 p.m.-3:30 p.m., D. H. Hill Jr. Makerspace

Getting Started with eTextiles
Tuesday, Oct. 16, 11:00 a.m.-1:00 p.m., D. H. Hill Jr. Makerspace

Sewing Basics I
Wednesday, Oct. 17, 1:30 p.m.-3:30 p.m., D. H. Hill Jr. Makerspace

Getting Started with Arduino
Friday, Oct. 26, 10:00 a.m.-11:30 a.m., D. H. Hill Jr. Makerspace

Getting Started with 3D Printing
Tuesday, Oct. 30, 11:00 a.m.-12:00 p.m., D. H. Hill Jr. Makerspace

Getting Started with the Raspberry Pi: Building and Controlling Beginner Projects
Friday, Nov. 2, 10:00 a.m.-11:30 a.m., D. H. Hill Jr. Makerspace

Getting Started with 3D Printing
Wednesday, Nov. 7, 11:00 a.m.-12:00 p.m., D. H. Hill Jr. Makerspace

Getting Started with the Internet of Things
Friday, Nov. 9, 10:00 a.m.-11:30 a.m., D. H. Hill Jr. Makerspace

Getting Started with Digital Embroidery
Wednesday, Nov. 14, 1:30 p.m.-3:30 p.m., D. H. Hill Jr. Makerspace